Dr. Fixit 301 Pidicrete URP - SBR Latex for Repairs & Waterproofing 1kg

Product Overview

Modify and strengthen your structural repairs with Dr. Fixit 301 Pidicrete URP. This premium Styrene Butadiene Rubber (SBR) latex liquid is a versatile, high-performance bonding agent specifically engineered for structural concrete repairs, waterproofing applications, and high-strength mortar modification. It drastically improves the tensile, flexural, and adhesive properties of cement mixes, preventing delamination while sealing out moisture ingress.

Key Features

• Multipurpose SBR Latex: Functions perfectly as an economical waterproofing coating, a specialized repair mortar modifier, or a high-strength bonding agent.

• Exceptional Bond Strength: Prevents cold joints by creating an unbreakable chemical bond between old and fresh concrete layers.

• Enhances Mix Durability: Modifies cement matrices to resist structural water penetration, decrease shrinkage cracking, and withstand mild chemical exposure.

• Ready to Mix Formula: Easily blends with standard cement, sand, and aggregates without clumping or segregating.

Product Specifications

Recommended Applications & Methods

1. Surface Preparation

• Mechanically clean the target concrete or masonry surface to remove all loose particles, structural dust, dirt, oil, and grease.

• Vacuum clean thoroughly to completely remove any remaining loose debris.

2. Application Workflows & Coverage Metrics

A. As an Economical Waterproofing Coating

• Mixing Ratio: Mix Dr. Fixit Pidicrete URP with fresh cement in a uniform 1:1.5 ratio by volume.

• Application: Apply evenly in 2 coats over the surface. Note that a protective plaster screed is a mandatory layout requirement over this coating.

• Coverage: Delivers a yield of 2 - 2.2 m²/kg across 2 coats.

B. As a Repair Mortar Modifier

• Mixing Ratio: Blend Dr. Fixit Pidicrete URP at a dosage of 10%–15% by weight of cement into a standard 1:3 (cement to fine sand) mix. Add approximately 20% water by weight of cement to adjust to a workable consistency.

• Coverage / Dosage: Requires roughly 6–7.5 kg of Dr. Fixit Pidicrete URP per 50 kg bag of cement.

C. As a Screed Concrete Modifier

• Mixing Ratio: Add 10%–15% by weight of cement to a screed concrete mix designed in a proportion of 1:1.5:1.5 (cement : sand : 6mm aggregate), alongside 20% water by weight of cement. Mix to a uniform consistency.

D. As a Bond Coat in Repair Work

• Mixing Ratio: Mix Dr. Fixit Pidicrete URP with fresh cement in a tight 1:1 ratio by volume.

• Application: Apply directly onto the pre-wetted, damp substrate. Overlay your fresh repair mortar or concrete while this bond coat is still tacky or sticky to the touch.

• Coverage: Delivers a high yield of 4.2 - 4.5 m²/kg per single coat.

Manufacturer & Support Information

• Parent Brand: Pidilite Industries Ltd., Regent Chambers, Mumbai, Maharashtra 400 021.

• Dr. Fixit Advice Centre: For expert project technical support or customer complaints, call toll-free at 1800 209 5504 or email info.drfixit@pidilite.com.